In unincorporated Kitsap County, including Silverdale, Kingston and Hansville, you need a building permit from the county’s Department of Community Development (DCD) for new homes, additions, structural remodels, covered porches, new or replacement windows and doors, and decks 30 inches or more above grade. Inside Bremerton, Port Orchard, Poulsbo or Bainbridge Island, the city’s own building department issues the permit instead. Cosmetic work such as painting, flooring, cabinets and countertops does not need a building permit.
This guide covers which projects need a permit, how to apply on the county’s online portal, who to call, and how long review takes.
Updated November 2026.
A building permit is an official approval issued by the Kitsap County Department of Community Development (DCD) that allows you or your contractor to proceed with construction or remodeling work in accordance with local building codes and regulations.
Permits help ensure:
You’ll likely need a permit for any of the following:
💡 Pro tip: Even small changes like replacing a water heater or furnace may require permits if plumbing, gas, or electrical systems are involved.
Some minor or cosmetic updates are exempt from building permits, including:
⚠️ Always Check First! Even if your project doesn’t require a building permit, it may still be regulated by Kitsap County’s zoning, shoreline, or environmental codes. Call the DCD at (360) 337-5777 or visit kitsap.gov/DCD before starting work.
Work with a contractor to develop plans that meet county codes.
Apply online through the county’s Permit Application Portal (see How to apply below).
The DCD reviews your plans for zoning, building, plumbing, electrical, and environmental compliance.
Once approved, you receive your permit and inspection schedule.
Inspectors verify code compliance at key construction stages.
Once all inspections pass, your permit is closed.
⏱️ Review time depends on the county’s queue and on how complete your application is; see How long does a Kitsap County building permit take? below.
Kitsap County DCD runs two online systems: you apply in the Permit Application Portal, then pay, issue and book inspections in the Online Permit Center. The county’s Permit Pathways page sets out the order:
Not sure your project needs a permit at all? DCD’s Do I Need a Building Permit? tool walks through decks, sheds, fences, retaining walls and remodels one question at a time.
Source: Kitsap County DCD contact page.
DCD says intake processing usually takes about 7 days or less. Once the permit has a number and the fees are paid, it joins the county’s review queue in the order complete applications were accepted. You can look up your place in line on the Where Is My Permit In Line? dashboard, which also shows how long the oldest permit in each category has been waiting. A complete first submittal is the biggest thing you control: every resubmittal sends the plans back for another round of review.
Additions that add square footage always need a permit. If you are planning a garage addition in Kitsap County, our team handles the permitting, structural engineering and code compliance for you. For project-specific rules, see our guides to home addition permits, deck permits and codes and building an ADU in Kitsap County.
We know permits can feel overwhelming. That’s why Peninsula Construction Services handles everything for you—from architectural planning to submitting permit applications and scheduling inspections.
With over 35 years of experience building and remodeling homes across Kitsap County, we know exactly how to:
✅ Transparency, craftsmanship, and attention to detail are at the heart of what we do. Let us take the paperwork off your plate so you can focus on the exciting part—bringing your vision to life.
For property in unincorporated Kitsap County, apply online in DCD’s Permit Application Portal. Inside Bremerton, Port Orchard, Poulsbo or Bainbridge Island, apply to that city instead.
Yes. DCD’s permit guide lists new or replacement doors and windows, and siding replacement, as work that needs a building permit in unincorporated Kitsap County. Our siding replacement guide covers the costs and siding types.
On a residential lot, a shed or storage building needs a permit if it is over 200 square feet or holds mechanical equipment such as a heat pump or generator.
Log in to the Online Permit Center, or check the Where Is My Permit In Line? dashboard with your permit number. You can also call Kitsap1 at (360) 337-5777.
Want us to handle the permit for your project? Request a free estimate or call (206) 276-2669.
Get in touch today and let Peninsula Construction Services help you bring your vision to life—from permits to final nail.
Call us today at (206) 276-2669
Schedule a free consultation and let’s get your permits—and your project—rolling.
“Peninsula Construction Services completely transformed our home. The attention to detail, communication, and craftsmanship were top-notch. We couldn’t be happier!”
— Sarah T., Silverdale
“From the first consultation to the final walk-through, the process was smooth and stress-free. Highly recommend them for any home remodeling project.”
— Michael R., Bainbridge Island